 |
 |
Disposable Double
Lumen Sphincterotome |
Disposable Triple
Lumen Sphincterotome |
|
 |
| |
| • Both CleverCut2VTM and CleverCut3VTM have a C-Hook so that they can be attached to the V-Scope allowing the endoscopist greater device control and the ability to manipulate the guidewire, injection and handle. |
 |
| • Both the CleverCut2V and CleverCut3V contain the V-Marking, located on the proximal side of the sheath to indicate when to raise and lower the V-Groove elevator. |
|
| • The V-Sheath design on the CleverCut2V and CleverCut3V allows the guidewire sheath and injection/handle to be separated allowing control of the sphincterotome by either the endoscopist or the assistant. |
|
• CleverCut™ coating, an insulated coating at the proximal end of the cutting wire.  It also reduces the chance of electrical contact between the wire and the endoscope, reducing the chance for endoscope damage. |
|
• In the  CleverCut2V, two stabilizing wires ensure orientation of the cutting wire so that it is consistently and reliably in the correct 12:00 position. |
|
• In the CleverCut3V,  the cutting wire, injection lumen and guidewire lumen are arranged to maximize efficiency allowing for easier orientation of the cutting wire. |
|
| • On the CleverCut3V, the injection lumen and guidewire lumen are completely separate, allowing smooth injection of contrast with the guidewire in place. |
|
| • Various tip lengths and cutting wire lengths are available. |
|
| • CleverCut2V and CleverCut3V have monofilament wires. |
|
| • The radiopaque tips of the CleverCut2V and CleverCut3V provide excellent visibility under fluoroscopy. |
|
| • Most models accommodate an 0.035" guidewire. |
|
